Home > Flight Simulator Airline Crew Simulations > PMDG 737 NGX (Legacy Version) > Voice Control > Procedures > PMDG 737 NGX SPECIAL BUNDLE PACK- VOICE > Rejected Takeoff Procedures

Rejected Takeoff Procedures


To initiate a Rejected Takeoff, speak: “ABORT ABORT”.

Perform the following:

  1. Close the thrust levers.
  2. Disengage the autothrottle.
  3. Apply maximum braking or verify operation of the RTO system if it was selected.
  4. Raise the speedbrake lever.
  5. Apply maximum reverse thrust consistent with the conditions.


FS2Crew will change to ROLL-OUT mode.

When you exit the runway, you have two options:

1.    If you are returning to the gate, speak: “OKAY TO CLEAN UP”.  

The FO will then perform his normal After Landing flow and you can return the gate as per a normal after landing/arrival sequence.

Or:

2.    If you want to taxi back for takeoff, speak: “LETS TAXI BACK TO THE RUNWAY”.
You will then need to run the Before Takeoff Checklist again.