Home > Flight Simulator Airline Crew Simulations > Majestic Dash 8 Q400 > Voice Control and Button Control > Voice Commands & Voice Checklists > Overhead, Main and Console Panels
Overhead, Main and Console Panels
- SELECT TERRAIN INHIBIT TO ON
- SELECT TERRAIN INHIBIT TO OFF
- SET G P W S LANDING FLAP TO TEN
- SET G P W S LANDING FLAP TO FIFTEEN
- SET G P W S LANDING FLAP TO THIRTY FIVE
*NOTE: G P W S can also be spoken as "JIP WIZ" which is common airline slang for GPWS.
- SET D C EXTERNAL POWER TO ON
- SET D C EXTERNAL POWER TO OFF
- SET D C GENERATOR ONE TO OFF
- SET D C GENERATOR TWO TO OFF
- SET D C GENERATOR ONE TO ON
- SET D C GENERATOR TWO TO ON
- SET A C EXTERNAL POWER TO ON
- SET A C EXTERNAL POWER TO OFF
- SET A C GENERATOR ONE TO OFF
- SET A C GENERATOR TWO TO OFF
- SET A C GENERATOR ONE TO ON
- SET A C GENERATOR TWO TO ON
- SET AIRFRAME MODE TO OFF
- SET AIRFRAME MODE TO MANUAL
- SET AIRFRAME MODE TO SLOW
- SET AIRFRAME MODE TO FAST
- SET PROP ANTI ICE TO ON
- SET PROP ANTI ICE TO OFF
- SET REFERENCE SPEED TO INCREASE
- SET REFERENCE SPEED TO OFF
- SET THE ENGINE INTAKES TO OPEN
- SET THE ENGINE INTAKES TO CLOSE
- SET THE BOOT AIR TO NORMAL
- SET THE BOOT AIR TO ISOLATION
- SET THE STANDBY PITOT STATIC TO STANDBY
- SET THE STANDBY PITOT STATIC TO OFF
- SET PITOT STATIC ONE TO ON
- SET PITOT STATIC ONE TO OFF
- SET WINDSHIELD HEAT TO OFF
- SET WINDSHIELD HEAT TO NORMAL
- SET WIPER TO PARK
- SET WIPER TO OFF
- SET WIPER TO LOW
- SET WIPER TO HIGH
- SET PILOT SIDE WINDOW HEAT TO ON
- SET PILOT SIDE WINDOW HEAT TO OFF
- SELECT ICING LEVEL ONE
- SELECT ICING LEVEL TWO
- SELECT ICING LEVEL THREE
- SET APPROACH LIGHTS TO ON
- SET APPROACH LIGHTS TO OFF
- SET FLARE LIGHT TO ON
- SET FLARE LIGHT TO OFF
- SET TAXI LIGHT TO ON
- SET TAXI LIGHT TO OFF
- SET WING INSPECTION LIGHT TO ON
- SET WING INSPECTION LIGHT TO OFF
- SET ANTI COLLISION LIGHT TO RED
- SET ANTI COLLISION LIGHT TO OFF
- SET ANTI COLLISION LIGHT TO WHITE
- SET THE POSITION LIGHT TO ON
- SET THE POSITION LIGHT TO OFF
- SET THE LOGO LIGHT TO ON
- SET THE LOGO LIGHT TO OFF
- SET THE RECIRCULATION FAN TO ON
- SET THE RECIRCULATION FAN TO OFF
- SET BLEED ONE TO ON
- SET BLEED ONE TO OFF
- SET BLEED TWO TO ON
- SET BLEED TWO TO OFF
- SET THE BLEED TO MINIMUM
- SET THE BLEED TO NORM
- SET THE BLEED TO MAXIMUM
- SET THE LEFT PACK TO OFF
- SET THE LEFT PACK TO MANUAL
- SET THE LEFT PACK TO AUTO
- SET THE RIGHT PACK TO OFF
- SET THE RIGHT PACK TO MANUAL
- SET THE RIGHT PACK TO AUTO
- SET FASTEN BELTS TO ON
- SET FASTEN BELTS TO OFF
- SET SEAT BELTS TO ON
- SET SEAT BELTS TO OFF
- SET NO SMOKING TO ON
- SET NO SMOKING TO OFF
- SELECT MAX CRUISE POWER
- SELECT MAX CLIMB POWER
- SELECT MAX POWER
- SELECT WEATHER RADAR ON
- SELECT WEATHER RADAR STANDBY
- SET XXX (POINT/ DECIMAL) ON COMM 1
- SET XXX (POINT/ DECIMAL) ON COMM 2
- SET XXX (POINT/ DECIMAL) XX ON NAV 1
- SET XXX (POINT/ DECIMAL) XX ON NAV 2
- START THE APU
- TURN OFF THE APU